2 Piece Muzzle Brake with Sound Director
This 2 piece design provides a great recoil reduction as well as A sound director. Redirects sound forward to greatly reduce the "at ear point blast" compared to with the sleeve removed. Design to redirect propellant gases with the effect of countering flash recoil and unwanted rising of the barrel during firing. Quality made here in the USA with A311 StressProof Steel. Item is 2.325" and really sets off the look of the gun....very nice.
Outer threads are 13/16" X 16
- Caliber Choice " .223/556 cal. OR 300 .308, 7.62.
- Length - 2.325" Width/OD - 1.25 sleeve - 1" Brake"
- Barrel Thread - Multiple options
- Outer sleeve Thread - 13/16" X 16 Thread Length - 3/4
- Material - Steel A311 Stress Proof / T6061 Aluminum Sleeve
- Finish - Hard Coat Anodized MIL-A-8625F Type III / Color as Shown
Flash Hider/Redirector Sleeve
Posted by JE on 30th Dec 2020
Product works great. I purchased it as a courtesy to other shooters on the range and for my hearing until I get my suppressor. I also noticed slightly reduced recoil which I honestly wasn't looking for. A great product indeed.
Posted by 2Bthe1 on 30th Dec 2020
I am pleased with the awesome quality of this product. I is well made and solid built.
Pwrforms as advertised
Posted by BloodRedeemed on 9th Jun 2018
I just had my Kineti-Tech linear comp and redirector sleeve installed and WOW! This thing definitely performs as advertised. At an indoor range concussion is a major annoyance, not only to yourself, but also everyone around you. This comp and redirector push all the gas up (linear comp) and forward (redirector sleeve). The range officers said that they could tell a huge difference in what they felt and so could I. The AR platform is still loud, but now the concussion felt is significantly reduced . Thank You Kineti-Tech! I will be promoting your product to others, and I am very satisfied with you offerings as well as the affordability of this product relative to the performance and enhancement on my M400 enhanced.
great muzzle break/ blast sleeve
Posted by mike on 25th May 2018
Great product. I put it on a pistol build.....looks great! Definatly redirects some of the concussion. I will put one of these on the next pistols I build for sure!! Greta product, great shipping. You will not be disappointed with this product. This product rivals all the more expensive blast cans and is well worth putting on your gun!!! I highly recommend buying from Kineti tech.
Posted by Joseph on 15th May 2018
This is a great product. Well-crafted, and fits under thin rails. Seemingly one-of-a-kind on the market couldn't find another company that made a blast Shield that fits over a muzzle brake that would fit in a Slimline rail.
Chose the zero recoil with knurled can
Posted by Kenneth Nichols on 13th Feb 2018
The muzzle break reduces recoil almost completely.
Good fit, looks good, functions well
Posted by Sandy in WI on 29th Aug 2017
These are an excellent value for the price, though I highly recommend spending the few extra dollars on the clocking rings. I hand-sanded the standard crush washers I had on hand from another manufacturer down to properly clock the muzzle devices - and that was a horrible experience.
The brakes I installed functioned well, and the attached flash cans do really look nice.
Great Muzzle Brake
Posted by richard on 9th Aug 2017
Very nice muzzle brake and works great. Nice finish on item and fast shipping. Would buy from Kineti-tech again.
Posted by Unknown on 10th Jul 2017
I have four of these, the functionality is excellent. Being able to go from muzzle brake to shroud when shooting near others is effortless. The 13/16" threads fit multiple attachments. Good product!
2 Piece Muzzle Brake
Posted by William Christian on 4th Jul 2017
Great muzzle brake set I have onever for my .300Blackout and 5.56 barrel and perform great at the range.
quality that works
Posted by Keith Falerios on 7th Feb 2017
Very happy with the Kineti-tech devices. I have several and they work well, high quality too. I've converted several muzzle breaks to the Kineti-tech and really like the added blast diverter.
What a combo, at a price that can't be beat!
Posted by Derek on 25th Jan 2017
I was in the market for a muzzle brake and blast shield for a new .300 Blackout build. Many of the options on the market were upwards of $200 for a brake and blast shield. I came across a build thread and found kineticech and their combo, for slightly over 1/4 of the cost. I had my combo in less than a week and it was beautiful! Easy installation, nice finish, threads on and off easily. My only complaint was that there wasn't a crush washer included. Other than that, it's a fine piece and I'm excited to put some lead down range with it.
Zero Recoil Break is a Huge Upgrade for an AR Pistol
Posted by Ryan Linder on 29th Sep 2016
Put this on an AR pistol and it makes it much easier to shoot; it's like night and day. The redirector sleeve does a good job with sound--now my pistol sounds (to the shooter) like an AR carbine. The sleeve also looks nice on my AR pistol because it starts in the hand guard and ends out of it; nice bonus making it look like a faux supressor. I was so pleased with it that I ordered one for my carbine.
Posted by Greg on 19th Mar 2016
Great product. Great people. Good craftsmanship. Works great on my 10.5" 300 blk
AR must have
Posted by Unknown on 12th Dec 2015
Very impressed on quality, attention to detail and function. This is the ticket to complete my .300 black out pistol with 11" barrel. It does what it's supposed to do...direct the muzzle blast and noise forward.
I'm ordering for my other ARs!!!
Muzzle Brake/CSR Combo
Posted by Devilfox on 6th Nov 2015
So far I have ordered two of these systems using different combinations of muzzle brake/flash hider and outward appearance of the concussion sound re-director. I just recently put the muzzle brake on an AR15 Dissy build and have not fired it yet to verify the functionality of the brake effect, however it's design appears to be very effective. The second (flash hider design) has gone on a Ruger 10/22 build with a bull barrel, of which excellent flash suppression is exactly what I expected. Not that the .22 needs concussion/sound redirection, but it does look pretty neat with the sheath on and I'm not to worried about .22LR beating up the device. Time will tell on the AR, though!
Excellent muzzle device
Posted by Andrew on 4th Nov 2015
This muzzle device was installed on an 8.25" .300BLK pistol. I chose the 6 port version, and it works well to control the muzzle, even with the sound redirect sleeve on. I can't say that I recommend firing with the sleeve off due to the concussive blast, but it's much more pleasant with the sleeve on than when I was using a flash hider. Highly recommended!
***** 5 stars
Posted by Marine_Brah on 6th Sep 2015
When I first saw these brakes on line I thought that easily be over $100. I mounted it on an AR pistol to help with blow back, kind of like a KX3. Quality is on point, looks good, works good. Couldnt be happier.
Perfect for my AR pistol!
Posted by S. Carson on 9th Aug 2015
Very happy with your product! It's very well made and is exactly the look i was going for on my 300BLK pistol build. Functions as intended also. Thank you.
Not just thinking of myself
Posted by Shaun on 16th Jul 2015
This product is top notch. It can be used with or without the sound redirector. With it , sound is mush less than before. I put this on a .300 AAC blackout carbine and it changed the tone some. It's quit pleasant for shooters to my right or left when on the range. I would recommend this Kinetic-tech product to all who face similar situations.
phenomenal muzzle break
Posted by iggy on 14th Jul 2015
Looks great and sounds even better. Highly recommended. I know ill be purchasing these for every build now
Posted by Unknown on 14th Jul 2015
Fast shipping, great product. Worked exactly as advertised on my CQB AR pistol diverted a lot of the flash and noise straight forward instead of in my face.
muzzle brake solvent catcher
Posted by Letec on 29th May 2015
Well made works great but they should tell people it can be used as a "solvent catcher". If you don't know what a solvent catcher is look it up on YouTube. The only thing I would add is more designs.
So Far, So Good - Very Nice
Posted by Rigo on 31st Mar 2015
I ordered a create your own muzzle blast device and I couldn't be happier. These guys make quality products. I have yet to shoot my AR15 pistol with the device but if their build quality is any indication, it will redirect the blast exactly the way they say it will. The muzzle brake and shroud are well made solid pieces. The finish on them is very nice as well. I ordered mine on the 19th of the month and opted for 2 day shipping but didn't get it until the 30th. They manufacture all of their own parts but the finishing is done elsewhere. As soon as they got them from their contractor, they got it to me within two days. They didn't communicate this until I reached out to them but their customer service was very quick and responsive. I will clearly need to use a crush washer or some shims as I need to clock it correctly. I'm not sure that I saw anything like that available with my purchase. I should've investigated further. Like I said, so far, so good. I would definitely buy this again. Especially when you consider that similar items from bigger names cost two to four times as much.
Very nice product!
Posted by Unknown on 21st Jan 2015
Very high quality product. Very nicely made. Works great.
kineti-tech two pieces muzzle brake
Posted by Preston on 2nd Jan 2015
Just install it into my DB15 really a perfect fit. Just love the way it look. Will be going to the range to test fire it. will let you know how it sounds. I highly recommend it esp. the DB15 i HEARD IS LOUD.Will let you know how the sound direction will be.Have no problem fitting it.
Hands down the best option for .300 blackout!
Posted by Unknown on 27th Dec 2014
I have had three of these muzzle devices and have found them all to be very effective. I love the outside threads and you can use it with sound redirect screwed on 2 different ways for 2 different looks or without, so three choices.
Posted by Dave on 4th Dec 2014
This was my first short barrel brake/cover combo I have tried and so far its very good. Keeps the muzzle on line for quick follow up shots its still loud but better than I was expecting.
I like the idea of being able to change the outer tube if you want a different look.
I give this 4 stars only cause I have not tried others to compare but I did do a bunch of looking and reading and decided to give this one a try first and so far its GTG.
Posted by jack w on 11th Nov 2014
I was skeptical, but figured that I'd give this a try in case it would ease some of issues with brakes around me at the range.
The brake works very well, and concussion/sound redirector works exactly as advertised. I gave myself a great (unintentional) comparison when I forgot to mount the concussion protector on for the first shot on my second trip to the range. The on/off difference was dramatic.
And the combination is lighter than the muzzle brake I previously had on my 300 Blackout.
great product well made
Posted by Unknown on 16th Jul 2014
I saw this online and thought for the price I would give it a shot and wow was I impressed. I have recommended this to all I know with ar15s even the local gun store.
Timing ring is not easy
Posted by Dougboffl on 7th Jul 2014
So installed (needed 2 wrenches) on a 12" AR-pistol with their optional timing ring. I'm a FrogLube fan boy and coat everything in the stuff before install. I did not torque the timing ring to the muzzle/break. Had some difficulty getting the brake/ring to time correctly on muzzle and even then they would move together. Perhaps FrogLube doing more than desired. Anyway, made a few shots without the sleeve and felt the muzzle break was decent, then the sleeve and WOW! Big dif in the audible (even with electronic muffs) and huge dif on the concussion at shooting position. I've seen posts where others could not tell a dif and I can't imagine why not unless they shot 64" barrels or something. Going to torque the ring and break to see if they will stabilize and shoot it again. But wow, just wow.
Posted by Ed Canupp on 12th Jun 2014
Milling was very good, as was the knurled redirection unit, well made from a machining standpoint.
COOLEST MUZZLE DEVICE EVER!
Posted by MR.GUNZ on 20th May 2014
At first I had my doubts on this device. Once I installed it on my AR pistol and went out to shoot it; I could not believe the difference it made. When my wife shot it and I was standing to the side of her I could really tell a difference. Not to mention it looks good tucked under my hand guard. THANKS!
Noticeable difference in heard concussion
Posted by Unknown on 13th May 2014
Took it out Saturday and had my resident marksman (11B infantry sharpshooter) test the concussion with and without the cone. Impressive!
Perfect Sound re-director
Posted by Chuck on 30th Apr 2014
This sound and flash re-director is perfect for my DB-15P 7.5 barrel. the vast majority of the muzzle flash and sound go directly toward the target. The interchangeable sleeves are great for changing the look as I see fit. I highly recommend these sound and flash re-directors to any one with a short barrel who has issues with loud sound and bright flash in your face.
WOW QUALITY AND PERFORMANCE!!!
Posted by David on 21st Apr 2014
Phenomenal product. Perfect milling, perfect finish, awesome design with great performance. In addition costumer services is second to none. Really appreciate what these guys are more than willing to do for their costomers. Will be suggesting for future builds. Thanks guys